INTERNATIONAL GOLDSPAR SATIN VARNISH

International Goldspar Satin is a one-component interior satin varnish that is quick drying which helps to reduce dust pick up. This traditional varnish provides a hard smooth satin finish which is resistant to mild acids & alkalis.

Features

• A satin finish polyurethane varnish, designed primarily for interior use
• Resistant to hot water, mild acids and alkalis
• Quick dry formula that reduces dust pickup

Specification

• Brand: International
• Capacity:750ml
• Area: Above the Waterline
• Suitable for: Interior Cabin/Trims
• Finish/Sheen: Satin
• Suitable Water Types: Sea Water, Fresh Water
• Substrates: Wood
• Application Method: Airless Spray, Airmix, Brush, Conventional Spray, Roller
• Recommended Number of Coats (Brush & Roller): 3
• Recommended Number of Coats (Spary): 2 - 3
• Practical Coverage (Brush & Roller): 10.30 m²/L
• Practical Coverage (Spary): 6.90 m²/L
• Typical Shelf Life: 2 Years

Preparation

PREVIOUSLY VARNISHED WOOD

• In Good Condition: Clean with thinners. Sand smooth with 280-320 grade paper. Remove sanding dust with thinners.
• In Poor Condition: Remove all previous coatings.

BARE WOOD Ensure that the surface is thoroughly degreased. Sand smooth with 80-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat.

Priming bare wood: Thin the first coat by 10-15% with Thinner No.1.

Method

Apply a minimum of 3 unthinned coats, more if using a roller. Avoid using direct from the can. Pour the amount you expect to use in a separate container.

Hints

• Mixing: Stir well before use.
• Thinner: Thinner No.1, Thinner No.3
• Cleaner: Thinner No.1
• Airless Spray (Professional spray application only): Pressure: 176­210 bar. Tip Size: 1365­1580.
• Conventional Spray (Professional spray application only): Pressure: 2­3 bar. Tip Size: 1.1­1.4 mm. Thin 25­30% with Thinners No.3
• Roller: If applying by roller, lay off with a brush or pad otherwise air bubbles may become trapped in the film.
• Other: For Airmix spray application: Pressure: 2 bar. Tip Size: 06­113. For best results sand lightly between coats with 320­400 grade paper. Avoid using direct from the can. Pour the amount you expect to use in a separate container.

Hazard Warnings

Hazard Pictogram :
Signal Word:	Warning
Hazard Statements:	Flammable liquid and vapour May cause drowsiness or dizziness May cause damage to organs through prolonged or repeated exposure Harmful to aquatic life with long lasting effects
Precautionary Statement:	General: Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Do not breathe vapour. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	Hydrocarbons, C9-C11, N-alkanes, Isoalkanes, Cyclics, Naphtha (Petroleum), Hydrodesulfurized Heavy.
Supplemental Label Elements	Wear appropriate respirator when ventilation is inadequate.