INTERNATIONAL SCHOONER VARNISH

International Schooner Varnish is a premium one-component high gloss varnish which has exceptional durability and is suitable for interior & exterior use. This product is easy to apply and has a long lasting warm colour.

Features

• Excellent water resistance, silky application and self-levelling properties
• A deep, rich gloss that’s easy to apply
• For interior and exterior use with great UV protection

Preparation

PREVIOUSLY VARNISHED WOOD

• In Good Condition: Clean with Yacht Line Super Cleaner. Sand smooth with 280­-320 grade paper. Remove sanding dust with a dust wipe. 
• In Poor Condition:  Remove all previous coatings. 

BARE WOOD Sand smooth with 80-180 grade paper and then 280 grade paper. Clean surface by brushing, dusting or wiping. If wiping with solvent then allow to dry completely before applying first coat of varnish.

Method

Pour the amount you expect to use in a separate container. Avoid using direct from the can. Strain it through a paint strainer to ensure there is no contamination. 

PREVIOUSLY VARNISHED WOOD: Apply full coats, until a satisfactory finish is achieved. Sand between coats using 320-­400 grade paper. Remove dust with a dust wipe. 

BARE WOOD: Apply the first coat thinned 10% with Thinner No. 1. Apply a further 4­6 full coats until a satisfactory finish is achieved. Sand between coats using 320­400 grade paper. Remove dust with a dust wipe. Do not apply too thickly.

Hints

• Mixing: Stir well before use.
• Thinner: Brush ­ YTA800 Thinner No. 1. Spray ­ Thinner No. 1 or Thinner 910.
• Ventilation and Humidity Control: Apply in dry, well ventilated conditions. Avoid damp conditions. Cold weather retards the drying and humidity can spoil the gloss.
• Airless Spray (Professional spray application only): Pressure: 170 bar/2500 psi. Tip Size: 0.33­0.41 mm/13­16 thou.
• Air Atomized (Professional spray application only): Pressure Pot: Pressure: 3.44­4.47 bar/50­65 psi (gun pressure); 8­10 psi (pot pressure). Tip Size: 0.89­1.4 mm/35­50 thou. Siphon Cup: Pressure: 3.44­4.47 bar/50­65 psi ­ gun pressure. Tip Size: 0.89­1.4 mm/35­50 thou.
• Brush: Always use a clean brush that is kept specifically for varnishing. Clean brushes before use.
• Roller: If rolling, use a thin nap roller and "tip­off" with a clean natural bristle brush.
• Other: Spray pressures listed are recommendations only. The applicator may use any settings which yield the best results for the individual spraying technique and current weather conditions. To enhance appearance of the bare wood and fill porous open grain, apply Interstain according to label directions and allow to dry overnight. To prevent skinning in the tin add a teaspoonful (5ml) of Thinner No. 1 on the surface before closing the lid.

Hazard Warnings

Hazard Pictogram :
Signal Word:	Warning
Hazard Statements:	Flammable liquid and vapour
Precautionary Statement:	General: Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	Distillates (Petroleum), Hydrotreated Light, 2-Ethylhexanoic Acid, Zirconium Salt.
Supplemental Label Elements	Wear appropriate respirator when ventilation is inadequate.