Popular right now
Lots of people have looked at this recently

Selling fast!
Grab yours while you can
Y-10  |  SKU: 88000-Blue-325G

Y-10 ORIGINAL FIBERGLASS STAIN REMOVER

€23.00 EUR
Tax included Shipping calculated at checkout.

Frequently Asked Questions

Add some general information about your delivery and shipping policies.

How long does it take to deliver my order?
  • Handling time is 0-1 Business Days (Mon-Fri)
  • Delivery time 1-2 Business days (Mon-Fri)

 

How do I track my order?

Once your product has been dispatched, you will receive a tracking number that will allow you to follow it until it is delivered to you.

 

What’s your return policy?

All returns must be made within Twenty one (21) days after receiving your item. We cannot accept returns after 21 days.

 

Do you deliver across the world?

We currently deliver to the Republic of Ireland.

 

What payment method was received?

We accept PayPal, Visa and Mastercard. 

 

Don't hesitate to contact us If you have any Questions or Enquiries

Contact Us: 

Address: McHale Marine, Cloonduane, Ballycarra, Co.Mayo, F23 AT81, Ireland
Phone:  +353 (094) 903 2082
Email: info@mchalecaravans.ie
Business Hours: 9am - 5pm (Mon-Fri) 

Add a stand out message for your customers

Y-10 rapidly absorbs yellow brown waterline and transom stains on white or light-coloured fibreglass boats. 
Will not damage gelcoat. 
Application: To use, brush a thin coating of Y-10 over the stain, wait approximately 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. 

The gel spreads easily and adheres to vertical and overhead surfaces. 

Its also effective against rust stains around engine exhaust ports or other fittings and may be used on painted boats. 
Use in temperatures above 10 Celsius. 
It has been known to have removed waterline stains on a 26-footer - twice! 
Please note, gelcoat will not be damaged when applying Y10. 

325g tub

PLEASE NOTE: FOR SALE TO PROFESSIONAL USERS ONLY

Still the original and best GRP hull stain remover! 

Y-10 is a stain absorbent gel, which is easy to apply, requires no rubbing and is non-abrasive so it won't damage the hull. It rapidly removes yellow/brown waterline and transom stains on white or light coloured fibreglass sailboats and powerboats. 

To use brush a thin coating of Y-10 over the stain wait 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. The gel spreads easily and adheres to vertical and overhead surfaces. Y-10 is also effective at removing rust stains around engine exhaust ports and other fittings.

Care instructions

  • Use of gloves essential and nose mask advised
  • Do not use Y-10 on painted surfaces
  • Contains Oxalic acid (less than 10%)

Product safety

Please note the following hazard warnings:
Hazard pictogram(s):
Signal word: Danger
Hazard statement(s):

H317: May cause an allergic skin reaction.
H350: May cause cancer
H360FD: May damage fertility. May damage the unborn child.
Precautionary statement(s): P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P308 + P313: IF exposed or concerned: Get medical advice/attention.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364: Take off contaminated clothing and wash it before reuse.
P405: Store locked up.
P501: Dispose of contents/container in accordance with
local/regional/national/international regulations.
Supplemental Hazard information (EU) Not applicable.

Description
Y-10 rapidly absorbs yellow brown waterline and transom stains on white or light-coloured fibreglass boats. 
Will not damage gelcoat. 
Application: To use, brush a thin coating of Y-10 over the stain, wait approximately 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. 

The gel spreads easily and adheres to vertical and overhead surfaces. 

Its also effective against rust stains around engine exhaust ports or other fittings and may be used on painted boats. 
Use in temperatures above 10 Celsius. 
It has been known to have removed waterline stains on a 26-footer - twice! 
Please note, gelcoat will not be damaged when applying Y10. 

325g tub

PLEASE NOTE: FOR SALE TO PROFESSIONAL USERS ONLY

Still the original and best GRP hull stain remover! 

Y-10 is a stain absorbent gel, which is easy to apply, requires no rubbing and is non-abrasive so it won't damage the hull. It rapidly removes yellow/brown waterline and transom stains on white or light coloured fibreglass sailboats and powerboats. 

To use brush a thin coating of Y-10 over the stain wait 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. The gel spreads easily and adheres to vertical and overhead surfaces. Y-10 is also effective at removing rust stains around engine exhaust ports and other fittings.

Care instructions

  • Use of gloves essential and nose mask advised
  • Do not use Y-10 on painted surfaces
  • Contains Oxalic acid (less than 10%)

Product safety

Please note the following hazard warnings:
Hazard pictogram(s):
Signal word: Danger
Hazard statement(s):

H317: May cause an allergic skin reaction.
H350: May cause cancer
H360FD: May damage fertility. May damage the unborn child.
Precautionary statement(s): P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P308 + P313: IF exposed or concerned: Get medical advice/attention.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364: Take off contaminated clothing and wash it before reuse.
P405: Store locked up.
P501: Dispose of contents/container in accordance with
local/regional/national/international regulations.
Supplemental Hazard information (EU) Not applicable.

Payment & Security

Payment methods

  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Y-10

Y-10 ORIGINAL FIBERGLASS STAIN REMOVER

€23.00 EUR
Y-10 rapidly absorbs yellow brown waterline and transom stains on white or light-coloured fibreglass boats. 
Will not damage gelcoat. 
Application: To use, brush a thin coating of Y-10 over the stain, wait approximately 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. 

The gel spreads easily and adheres to vertical and overhead surfaces. 

Its also effective against rust stains around engine exhaust ports or other fittings and may be used on painted boats. 
Use in temperatures above 10 Celsius. 
It has been known to have removed waterline stains on a 26-footer - twice! 
Please note, gelcoat will not be damaged when applying Y10. 

325g tub

PLEASE NOTE: FOR SALE TO PROFESSIONAL USERS ONLY

Still the original and best GRP hull stain remover! 

Y-10 is a stain absorbent gel, which is easy to apply, requires no rubbing and is non-abrasive so it won't damage the hull. It rapidly removes yellow/brown waterline and transom stains on white or light coloured fibreglass sailboats and powerboats. 

To use brush a thin coating of Y-10 over the stain wait 10 minutes while a mild chemical reaction causes the stains to vanish, then wash it off. The gel spreads easily and adheres to vertical and overhead surfaces. Y-10 is also effective at removing rust stains around engine exhaust ports and other fittings.

Care instructions

  • Use of gloves essential and nose mask advised
  • Do not use Y-10 on painted surfaces
  • Contains Oxalic acid (less than 10%)

Product safety

Please note the following hazard warnings:
Hazard pictogram(s):
Signal word: Danger
Hazard statement(s):

H317: May cause an allergic skin reaction.
H350: May cause cancer
H360FD: May damage fertility. May damage the unborn child.
Precautionary statement(s): P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P308 + P313: IF exposed or concerned: Get medical advice/attention.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364: Take off contaminated clothing and wash it before reuse.
P405: Store locked up.
P501: Dispose of contents/container in accordance with
local/regional/national/international regulations.
Supplemental Hazard information (EU) Not applicable.
View product
Back to top